Swagelok® jacketed tubing helps provide increased protection against galvanic and atmospheric corrosion. Swagelok insulated tubing is designed for use in applications such as steam supply, condensate return, and gas and liquid transport lines, where weatherproofing and energy conservation are important. Swagelok insulated tubing offers a cost-effective alternative to field-installed insulation of small-diameter tubing systems.
- Stainless steel tubing available seamless and welded
- Low-temperature PVC jacket helps protect tubing from external corrosion and abrasion
- Fibrous glass insulation reduces heat loss and helps protect personnel
- Insulation contains less than 100 ppm of water-soluble chlorides
- Marked with part number and batch number
- Insulated tubing is available with urethane jacket material and in colors other than the standard black
-
Accessories include
- Bending tool
- Heat-shrink end-seal boots
- Silicone sealant
- Jacket patch kit
- Caps
- Weatherproof strip insulation
Jacketed Tubing Specifications
| Sizes | 1/4 to 1/2 in.; 6 to 12 mm |
Insulated Tubing Specifications
| Sizes | 1/4 to 1/2 in.; 6 to 12 mm |
Jacketed, Pre-Insulated Tubing Bundles—Electric-Traced and Steam-Traced
Swagelok pre-insulated traced tubing bundles provide reliable process temperature maintenance in a variety of analytical and process instrumentation applications, including impulse lines, sample lines, and process lines and provide an economical choice compared to field tracing and insulating. The parallel configuration—process and tracer lines are parallel inside the bundle—allows all tubes to bend together in as little as an 8 in. (20.3 cm) radius in tubing sizes up to 3/4 in. or 12 mm, so the bundle is easier to route and connect in the field than cabled bundles. Also available in multi-jacketed configurations.
- Water soluble chlorides less than 100 ppm
- Absorption-resistant fibrous glass insulation
- Resists wicking
-
Accessories include:
- Bending tools
- Heat-shrink end-seal and entry-seal boots
- Jacket patch kits
- Center line tool
- Silicone sealant
- Thermostats
- Electric tracers: power connection, tracer termination, and tracer splice/tee connection kits
Specifications
| Sizes | 1/4 to 3/4 in.; 6 to 12 mm |
"Safe Product Selection:
The complete catalog contents must be reviewed to ensure that the system designer and user make a safe product selection. When selecting products, the total system design must be considered to ensure safe, trouble-free performance. Function, material compatibility, adequate ratings, proper installation, operation, and maintenance are the responsibilities of the system designer and user.
|
Have Questions?
Our live chat provides support for all your fluid management solutions - from high-quality Swagelok Products, to application support and other services. Speak with a Swagelok Cambridge specialist right now!